CST 60 Ton Ironworker

Best value for your Ironworking needs.

Your 60 Ton Ironworker comes equipped with the following:

Punch station with pedestal die table - uses 219 punch and 413 die
Fully guarded
Adjustable steel strippers
Fully charged hydraulic system
Electric stroke control

Shear blades reversible for extra long life
2 LED lights installed in shearing station
Low rake angle on shear blades
Remote foot pedal operation
Coper notcher standard in rear station

Direct drive pump

Standard Punch Station with Pedestal Die Table
219 punch and 413 die
Standard Angle Shear

Angle Shear: 3" x 3" x 3/8", 4" x 4" x 1/4", mild steel
Standard Flat Bar Shear

3/8" x 14", 1/2" x 12", 3/4" x 4" mild steel
Standard Coper Notcher

2-1/2" x 4" x 3/8" mild steel
Toolpack-1

14 sets of 219 punches and 413 dies sizes from 1/4" through

1-1/16" in 1/16 increments.

Packed in a metal container.
Toolpack-2

8 sets of 228 punches and 419 dies sizes 1-1/8" through 1-9/16" in 1/16" increments.

Used on 228/419 oversized attachment only.
Optional Oversize Punching attachment

228 Punch 419 Die: Punches sizes up to 1-1/2" round through 5/16" thick mild steel - 241 Punch 28XX Die (shown) Punches sizes up to 3-1/2" round through 1/8" mild steel
Magnetic Accessory Light

Provides 100,000 hours of LED light. Attaches to any Ironworker surface.

Machine comes with 2 LED lights installed in shearing station
Optional Rod Shear

Shears 1/4 , 3/8 , 1/2 , 5/8 , 3/4 , 1" mild steel
Optional Multi-Shear

Flat Bar Shear: 1/4" x 6" mild steel - Angle Shear: 2" x 2" x 1/4" mild steel - Rod Shear: 1/4", 3/8", 1/2", 5/8", 3/4" mild steel - Square rod 13/16"
Optional Press Brake

8" or 10" Wide, 1/4" thick mild steel
Optional Pipe Notcher

Standard die sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"

Schedule 40 Pipe
Optional Turret Pipe Notcher Housing

Load 3 different pipe notcher dies at once and quickly switch from one size to the next.

Standard die sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"
Pipe Notcher Dies

Standard die sizes are 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"
Optional Angle Notcher

3" x 3" x 1/4" mild steel
Auto Cut

Adjustable proximity switch automates production when cutting repeatable lengths.

CST 60 Ton Ironworker

Description	Part No.	Availability	Price
60 Ton 3 Phase 208V	CST-IW60-3PH208	2 Weeks	$17,509.00
60 Ton 3 Phase 208V with PowerLink System	CST-IW60-3PH208-AC500	2 Weeks	$18,959.00
60 Ton 3 Phase 230V	CST-IW60-3PH230V	2 Weeks	$17,509.00
60 Ton 3 Phase 230V with PowerLink System	CST-IW60-3PH230V-AC500	2 Weeks	$18,959.00
60 Ton 3 Phase 380V	CST-IW60-3PH380	2 Weeks	$18,259.00
60 Ton 3 Phase 380V with PowerLink System	CST-IW60-3PH380-AC500	2 Weeks	$19,879.00
60 Ton 3 Phase 460V	CST-IW60-3PH460	2 Weeks	$19,139.00
60 Ton 3 Phase 460V with PowerLink System	CST-IW60-3PH460-AC500	2 Weeks	$19,559.00
60 Ton 3 Phase 575V	CST-IW60-3PH575V	2 Weeks	$18,909.00
60 Ton 3 Phase 575V with PowerLink System	CST-IW60-3PH575V-AC500	2 Weeks	$20,289.00
60 Ton Single Phase 230V	CST-IW60-1PH230	2 Weeks	$18,139.00
60 Ton Single Phase 230V with PowerLink System	CST-IW60-1PH230-AC500	2 Weeks	$19,559.00